This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.

Motor and Fin Assembly (98mm Airframe - 38mm Motor)

$60.00

No Epoxy Fin and  Motor Mount Assembly

 

An all new way to build rockets!  You no longer have to sit and wait hours to watch epoxy to dry just to sand and do it all again.  You can have a flight ready, picture perfect, and professional looking rocket in under an hour with this 8 ounce assembly.  The included hex key is all you need!  

  1. Two Anodized Aluminum Centering Rings: Designed to fit both 4” fiberglass and paper tubes. These rings securely hold a 38mm motor without the need for a separate motor mount tube. Each ring features a #8 thread for an eyebolt or motor retention.
  2. Three SLS Printed Nylon Brackets: These brackets are designed to hold 0.118” fins with a 4” root cord.
  3. All necessary hardware for assembly is included.

What's Included? 

  • 2x 4" aluminum centering rings with for a 38mm motor. (Weighs less than 1.5 oz)
  • 3x SLS nylon fin brackets for 3/16" fins with 4" root. 
  • 6x #8 ⅜" Socket head fasteners
  • 6x #8 ⅝" Socket head fasteners
  • 6x # Nylon Locknuts 
  • 9/64" Hex Key 
  • Washer (for motor retention)
  • #8 x 1" Fastener (for motor retention)

Motor and Fin Assembly (98mm Airframe - 38mm Motor)

$60.00
No Epoxy Assembly for an L1 Size Rocket

Anodized Aluminum Centering Rings

Unique fin and motor mount system that is super strong and lightweight.

No Epoxy Fin Assembly

Easily swappable fins to customize your rocket however you like.

Hardware and Tools

The Fishhawk rocket comes with all the tools and hardware needed to assemble and fly. (Motor Case Not Included)

Epoxy Gets Messy

All-In-One Assembly

Two anodized aluminum centering rings are the core of this all-in-one fin and motor mount assembly. Three white nylon brackets that hold the fins are fastened to threaded holes on the centering rings with the airframe in between. This creates a sturdy assembly. The centering rings also have mounts for a motor retainer screw and eyebolt for recovery. This also eliminates the need for a separate motor mount tube.